Product ID:OZONE FRIENDLY GREAT STUFF
MSDS Date:04/27/1990
FSC:8030
NIIN:01-192-2492
MSDS Number: BVXCX

INSTA-FOAM PRODUCTS INC

1500 CEDARWOOD DRIVE
JOLIET, IL 60435
US

Emergency Phone: 815-741-6800 EXT 56 [800-424-3900]

Info Phone: 800-435-9359 OR 815-741-6800

Preparer: SHERI MARVIN

Cage: 54577

INSTA-FOAM PRODUCTS INC

JOLIET, IL 60435 US

Telephone: 815-741-6800

Cage: 54577

URETHANE PREPOLYMER

Fraction By Weight: <65%

OSHA PEL 0.005 PPM TDI

ACGIH TLV: 0.005 PPM TDI

SILICONE SURFACTANT

Fraction By Weight: <2%

FLAME RETARDANT

Fraction By Weight: <10%

METHYLENE BISPHENYL ISOCYANATE (MDI) (SARA III)

CAS: 101-68-8

RTECS: NQ9350000

Fraction By Weight: <15%

OSHA PEL C, 0.02 PPM

ACGIH TLV: 0.005 PPM; 9394

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

POLYMETHYLENE POLYPHENYLENE POLYISOCYANATE

CAS: 9016-87-9

RTECS: TR0350000

Fraction By Weight: <15%

HALOGENATED HYDROCARBONS

Fraction By Weight: <35%

CATALYST

Fraction By Weight: <5%

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: MUCOUS MEMBRANES
IRRITATION, CHEST TIGHTNESS, COUGHING, HEADACHE, SHORTNESS OF
BREATH, ALLERGIC SENSITIVITY. SKIN: IRRITATION & DISCOLORATION.
EYES: IRRITATION. CORNEAL DAMAGE. INGESTION: IRRITATION &
CORROSIVE ACTION IN MOUTH & DIGESTIVE TRACT.
Explanation of Carcinogenicity:COMPONENTS OF THIS BLEND ARE NOT
CLASSIFIED AS CARCINOGENIC BY IARC, NTP OR OSHA.
Effects of Overexposure:INHALATION: BRONCHITIS, BRONCHIAL SPASM,
PULMONARY EDEMA, ASPHYXIATION. SKIN: REDDENING, SWELLING,
BLISTERING, SENSITIZATION & DERMATITIS.
Medical Cond Aggravated by Exposure:ASTHMA LIKE SYMPTOMS, CARDIAC
ARRHYTHMIA

First Aid:INHALATION: REMOVE TO FRESH AIR. GIVE OXYGEN OR ARTIFICIAL
RESPIRATION AS NEEDED. EYES: FLUSH W/WATER FOR 15 MINS. SKIN: USE A
MILD SOLVENT, LIKE MINERAL SPIRITS TO REMOVE FRESH FOAM. WASH
W/SOAP & WA TER. INGESTION: DON'T INDUCE VOMITING. GIVE 1-2 GLASSES
OF WATER OR MILK TO DRINK. DON'T GIVE ANYTHING BY MOUTH TO AN
UNCONSCIOUS PERSON. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:PMCC
Flash Point:390F/199C (MDI)
Extinguishing Media:DRY CHEMICAL, CO2, HIGH EXPANSION CHEMICAL FOAM,
LARGE QUANTITY WATER SPRAY FOR LARGE FIRES.
Fire Fighting Procedures:USE SCBA & PROTECTIVE CLOTHING INCLUDING
RUBBER COAT, BOOTS, GLOVES & HELMET. USE COLD WATER TO COOL FIRE
EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:DURING A FIRE, MDI VAPORS, HALOGENATED
HYDROCARBON VAPORS & OTHER DECOMPOSITION PRODUCTS THAT ARE HIGHLY
TOXIC CAN BE GENERATED. EXPLOSIVE RUPTURE IS POSSIBLE.

Spill Release Procedures:VENTILATE AREA. SCRAPE THE BULK OF SPILL INTO
A SUITABLE WASTE RECEPTACLE USING A STIFF PIECE OF CARDBOARD, ETC.
AVOID SPREADING SPILL. REMOVE RESIDUE FROM SURFACES W/A RAG & PAINT
THINNER/MINERAL SPI RITS. LOOSELY COVER & PLACE IT IN SAFE PLACE.
Neutralizing Agent:NO INFORMATION GIVEN BY MFR ON MSDS.

Handling and Storage Precautions:PROTECT AEROSOL CAN FROM PHYSICAL
ABUSE. FOR LONGEST SHELF LIFE, AVOID STORAGE >90F. SHORT TERM
STORAGE BETWEEN 40-60F WILL NOT HARM THE MATERIALS.
Other Precautions:IDEAL STORAGE IS 60-90F. STORAGE AT LESS THAN 40F MAY
CAUSE LIQUIDS IN THE CANS TO SEPARATE. SHAKE CAN VIGOROUSLY TO
RECOMBINE CHEMICALS. USE W/ADEQUATE VENTILATION. AVOID CONTACT
W/SKIN.

Ventilation:ADEQUATE SO TLV IS NOT EXCEEDED. INDOORS: EXHAUST DURING &
AFTER FOAMING OPERATION.
Protective Gloves:CHEMICAL RESISTANT RUBBER, PLASTIC
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:LONG SLEEVE WORK CLOTHES
Work Hygienic Practices:EDUCATE/TRAIN EMPLOYEES IN SAFE USE. READ ALL
PACKAGE DIRECTIONS. REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
BOILING POINT: HALOGENATED HYDROCARBON: <0F; OTHER COMPONENTS: >200F;
MDI AS VISCOUS LIQUID: 406F.

HCC:V3
NRC/State Lic Num:NONE
Boiling Pt:B.P. Text:SEE SUPP
Vapor Pres:4000
Vapor Density:8.5 (MDI)
Spec Gravity:1.3
Solubility in Water:REACTS
Appearance and Odor:LIQUID/GASSES UNDER PRESSURE: STICKY FROTHY UPON
RELEASE, OFF WHITE W/MILD ODOR
Percent Volatiles by Volume:40

Stability Indicator/Materials to Avoid:YES
ALCOHOLS, WATER, STRONG BASES & SOME METAL COMPOUNDS
Stability Condition to Avoid:OPEN FLAMES, TEMPERATURES >120F OR <32F,
MOISTURE
Hazardous Decomposition Products:CO, OXIDES OF NITROGEN, TRACES OF
HYDROGEN CYANIDE, DIPHENYLMETHANE-4,4'-DIISOCYANATE, INORGANIC
ACIDS, CARBONYL HALIDES
Conditions to Avoid Polymerization:MOISTURE OR OTHER MATERIALS THAT
REACT W/ ISOCYANATE. MAY OCCUR AT TEMPERATURES >400F.

Waste Disposal Methods:DON'T PUNCTURE OR INCINERATE CAN. CAREFULLY VENT
CAN. INVERT CAN & DISPENSE PRODUCT DIRECTLY THRU CAN VALVE INTO A
SUITABLE WASTE CONTAINER. REMOVE WASTE CONTAINER TO A SAFE LOCATION
W/LOOSE FITTING C OVER UNTIL FOAM IS FULLY CURED. DISPOSEAS WASTE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.